Getting Started Guide for DM6446 EVM

From RidgeRun Developer Connection
Revision as of 13:36, 11 October 2011 by Dchaverri (Talk | contribs)

Jump to: navigation, search


On this page you are going to find all the necessary information to start from scratch to use the RidgeRun SDK on your DM6446 evaluation module (EVM). In the following sections we assume that you have already downloaded the DVSDK version and that you have installed the toolchain 2009q1-203 from codesourcery as well as your DM6446 SDK following the steps on The RidgeRun installation guide.

Supported drivers

RidgeRun SDK's kernel has support for the following list of drivers for the DM6446 processor:

  • UART driver
  • I2C driver
  • GPIO driver
  • EDMA driver
  • NAND driver with 4-bit ECC, SLC/MLC, up to 4K page size support
  • MMC/SD driver with SDHC and SDIO support
  • SPI driver with EEPROM support (polled, PIO and DMA mode of operation)
  • USB driver with Host, Device and OTG modes; Supports USB Host/Device Mass Storage Class, USB Hub and HID clasess as well as USB Device CDC / RNDIS classes