Mounting an USB drive on the DM365 Leopard Board

From RidgeRun Developer Connection
Revision as of 16:39, 10 September 2010 by Pbarrantes (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

In order to do this an USB A Female to Mini B Male converter is needed. Connect the converter to the board and then the USB drive to the A female side. The USB drive mounting point will be /dev/sda1 so in order to explore the drive contents the following commands must be executed on the target:

mkdir drive
mount /dev/sda1 drive/
cd drive